Sherlotronics GATE_ALARM

To Next Page

English

Model No: GATE_ALARM

Gate Alarm transmitter unit

Installation Instructions - For Service Persons Only

Model:

Encryption type:

Transmission frequency:

Transmission method:

Modulation

Transmission range:

Battery life duty cycle:

Voltage range:

Standby current consumption:

Current consumption on TX:

Operating Temperature:

Dimension (lxbxh)

Gross weight:

GATE_ALARM

Code hopping

403MHz / 433MHz

OOK

100m “Line of sight” 50m“Indoors”

30 000

3VDC or 12VDC jumper select

+/-1uA 10%

+/-15mA 10%

-3°C to 49°C

124 x 80 x 30mm

210g

Technical Specifications:

Main Page

Need help?

Do you have a question about the Sherlotronics GATE_ALARM and is the answer not in the manual?

Summary

Technical Specifications

Features and Approvals

Order Codes and Warranty

Mounting Advice

Programming and Setup

Programming the Gate Alarm to a Receiver

Steps to pair the Gate Alarm transmitter with a receiver unit for communication.

Gate Alarm Setup on an Alarm Panel

Configuration of the Gate Alarm as a standard intruder zone on an alarm panel.

Jumper Settings and Monitoring

Jumper Settings

Explanation of various jumper configurations for input and output triggers.

Gate Alarm Monitoring

Procedure for setting up the unit to monitor gate open/closed states.

Gate Alarm Setup as a 24 Hour Zone