SHERMAN-profi MIG 261M

Need help?

Do you have a question about the SHERMAN-profi MIG 261M and is the answer not in the manual?

Summary

1. GENERAL

2. SAFETY STATE

3. GENERAL DESCRIPTION

4. SPECIFICATIONS

4.1 WELDER SPECIFICATIONS

Details technical specifications for the MIG welders.

5. FUNCTIONAL DESCRIPTION

6. MODES OF CONTROL

7. PROTECTION AGAINST OVERHEATING

8. PREPARATION OF DEVICES TO WORK

8.1 SHIELDING GAS CONNECTION

Procedure for connecting and preparing shielding gas cylinders.

8.2 SUPPLY NETWORK CONNECTION

Steps for connecting the welding device to the power supply network.

8.3 REEL WIRE ELECTRODE ESTABLISHMENT

Guides on installing and preparing the wire electrode reel.

8.4 PREPARATION FOR MIG WORK

Outlines preparations for MIG welding, including tip selection.

9. WELDING PROCESS

9.1 MMA WELDING

Step-by-step instructions for MMA welding processes.

9.2 MIG; MAG WELDING

Instructions for MIG/MAG welding methods.

9.2.1 GAS-SHIELDED WELDING

Procedures for gas-shielded MIG/MAG welding.

9.2.2 SELF-SHIELDED WIRE WELDING

Procedures for self-shielded wire welding.

10. BEFORE CALLING SERVICE

11. OPERATION MANUAL

12. MAINTENANCE INSTRUCTIONS

13. STORAGE AND TRANSPORT INSTRUCTIONS

14. COMPLETE SPECIFICATION

15. SCHEMATIC ELECTRICAL DIAGRAMS

15.1 MIG 261 m SCHEMATIC

Electrical schematic diagram for the MIG 261m model.

15.2 MIG 300 M SCHEMATIC

Electrical schematic diagram for the MIG 300M model.

15.3 MIG 351 m SCHEMATIC

Electrical schematic diagram for the MIG 351m model.

16. WARRANTY

DECLARATION OF CONFORMITY