Need help?Do you have a question about the Sherman DIGIMIG 200GD and is the answer not in the manual?
Highlights risks like electrical shock, burns, gas poisoning, and explosion hazards.
Details precautions against electrocution and proper installation for safe operation.
Specifies necessary protective gear for eyes, skin, and respiratory protection during welding.
General| Type | Inverter |
|---|---|
| Welding Process | MIG/MAG, MMA |
| Input Voltage | 230V |
| Rated Input Frequency | 50/60Hz |
| Output Current Range (MIG/MAG) | 30-200A |
| Output Current Range (MMA) | 30-180A |
| Duty Cycle at 200A (MIG/MAG) | 60% |
| Duty Cycle at 180A (MMA) | 60% |
| Wire Feed Speed | 2-15 m/min |
| Wire Diameter Range | 0.6-1.0mm |
| Efficiency | 85% |
| Power Factor | 0.93 |
| Insulation Class | F |
| Protection Class | IP21S |
| Gas Type | CO2, Argon |
To Next Page