Need help?Do you have a question about the Sherwood S5 and is the answer not in the manual?
General| Type | Integrated Stereo Amplifier |
|---|---|
| Power output | 15 watts per channel into 8Ω (stereo) |
| Total harmonic distortion | 0.05% (1kHz, 50W) |
| Dimensions | 420 x 150 x 360mm (W x H x D) |
| Weight | 10.5kg |
| Frequency response | 20Hz to 20kHz |
| Input sensitivity | 150mV (line) |
| Signal to noise ratio | 90dB (line) |
| Speaker load impedance | 4Ω to 16Ω |
| Signal-to-Noise Ratio | 90dB (line) |
Important safety warnings and cautions for operating the unit, including electrical shock and fire risks.
Crucial safety advice and warnings related to the unit's installation and usage.
Guides on how to install the main unit on a shelf or mount it on a wall.
Steps to turn on the unit and select an input source for playback.
Procedure to reset the main unit to its factory default settings.
Addresses common issues like power, sound, and remote control operation problems.
Solutions for no sound, interrupted sound, or noise, especially with DTS audio sources.
To Next Page