Shihlin SE2 Series User Manual

1
Guide for Manual
Guide for Manual
The Shihlin electric SE2-TYPE inverters have been designed with many complex parameterized
functions to meet most of the application requirements from the market. For customers who contact
inverters for the first time, such a complex inverter may cause troubles when using it. So the users
are expected to read each part of this manual carefully so as to master the operating method of the
inverter. In case there is any question, please feel free to contact us.
In Chapter 2 of this manual, all the series and the corresponding specifications of Shihlin electric
SE2-TYPE inverters are listed in detail. Section 2-5 guids customers how to install the inverter and
emphasizes on precautions for safety that much attention should be paid to when utilizing the
inverter.
Chapter 3 guides customers how to use the inverter. In Section 3-1, the operating mode of the
inverter is outlined briefly; in Section 3-2, how to use the operation panel is described, and in
Section 3-3, simple operating steps are explained. Chapter 4 explains the functions of each parameter
in detail.
The definitions of terminologies in this manual are as follows:
1. Output frequency, target frequency, steady output frequency
• The actual output current frequency of the inverter is called ‘output frequency’.
• The frequency set by user (through a operation panel, multi-speed terminals, voltage signal or
current signal) is called ‘target frequency’.
• When the motor starts running, the output frequency of the inverter will gradually accelerate to the
target frequency, and finally run steadily at the target frequency. The output frequency at this time
is called ‘steady output frequency’.
2. There are detailed instructions on parameter settings in Chapter 4. In case users are not familiar
with these settings, arbitrary adjustment of the parameter may result in abnormal operations. All
parameters can be reset to their default values by the parameter of P.998. For the setting
procedure of this parameter, please refer to P.998 in Chapter 4.
3. The ‘operation mode’ of inverter, and the ‘working mode’ of the operation panel:
The operating mode determines the reference source for the target frequency and the signal source
for starting. The Shihlin inverter has totally 9 operating modes. Please refer to Section 3-1 for
details.
The operation panel mainly concerns monitoring of numeric values, setting of parameters and
setting of target frequency. The Shihlin operation panel has totally 5 working modes. Please refer
to Section 3-2 for details.
4. The difference between ‘terminal name’ and ‘function name’:
Near the terminals of the control board or the main board, printed letters can be found. These
letters are used to distinguish each terminal, and thus called ‘terminal name’.
For ‘multi-function control terminal’ and ‘multi-function output terminal’, besides the terminal
name, the ‘function name’ is also necessary to be defined. The function name indicates the actual
functions of the terminal.

Shihlin SE2 Series Specifications

General

Brand	Shihlin
Model	SE2 Series
Category	Inverter
Language	English

Summary

Product Examination

Nameplate and Model Information

Explains the inverter's nameplate details and model type designation.

Type and Indent Symbol Instructions

Deciphers model number components and provides examples of indent symbols.

Introduction of Shihlin Inverter

Electric Specifications

Details electric specs for 220V single-phase, 220V three-phase, and 440V three-phase inverter series.

Common Specifications and Dimensions

Outlines general inverter characteristics and physical dimensions.

Installation and Wiring Precautions

Crucial guidelines for safe and correct installation, wiring, EMC, and storage.

Primary Operation

Inverter Operating Modes

Explains the 9 distinct operating modes and their configurations for frequency and starting signals.

Operation Panel Working Modes

Details the 5 working modes of the operation panel for monitoring and setting functions.

Basic Operation Procedures

Step-by-step guides for PU, External, JOG, Communication, and Combined modes.

Pre-Operation Checks and Trial Run

Covers essential checks before operation and the procedure for performing a trial run.

Parameter Description

Frequency and Speed Control Parameters

Configures output frequency limits, base frequency, multi-speed, accel/decel, and starting frequency.

Motor Operation and Protection Settings

Covers torque boost, thermal relay, DC brake, stall prevention, over-torque detection, and carrier frequency.

Input Signals and Operation Modes

Details JOG mode, input signal selection, voltage/current inputs, operation mode selection, and remote control.

Advanced Control and Specialized Functions

Covers regenerative brake, soft-PWM, output frequency detection, AM terminal, restart, and zero-speed functions.

Communication and System Management

Configures communication settings, manages expansion boards, alarm history, parameter copy, reset, and initialization.

Inspection and Maintenance

Routine and Periodic Inspections

Daily and periodic checks to ensure proper inverter condition and performance.

Component Replacement and Resistance Measurement

Guidelines for replacing parts and measuring insulation resistance.

Appendix 1 Parameter List

Comprehensive Parameter Reference

A detailed list of all inverter parameters, their settings, and corresponding page references.

Appendix 2 Alarm Code List

Alarm Code Troubleshooting

Lists alarm codes, their causes, and troubleshooting steps for diagnosing issues.

Appendix 3 Warning Code List

Warning Code Troubleshooting

Describes warning codes, their causes, and how to resolve them without stopping operation.

Appendix 4 Troubles and Solutions

Common Troubleshooting Guide

Provides a systematic approach to diagnosing and resolving common inverter problems.

Appendix 5 Optional Equipment

Expansion Boards, Panels, and Cables

Details expansion boards, operation panels (DU03B, DU05, DU01, PU01), and transmission cables.

Appendix 6 Frequency Parameters of Ultra-High-Speed

Ultra-High-Speed Frequency Settings

Lists frequency-related parameters applicable when ultra-high-speed operation is enabled.

Amendment Record