To Next PageTo Next Page
Need help?Do you have a question about the Shihlin SA3 Series and is the answer not in the manual?
Provides essential safety guidelines for installation, operation, and maintenance of the inverter.
Lists the chapters and sections of the user manual for easy navigation.
Explains key terms used throughout the manual for better understanding.
Details how to interpret the information on the inverter's nameplate for identification.
Explains the conventions used in the inverter's model designation.
Describes the structure of order codes for different inverter specifications.
Details the electrical specifications, including voltage and current ratings for different models.
Provides general specifications like control methods, frequency range, and accuracy.
Shows the physical appearance and dimensions of the inverter for different frames.
Provides dimensions and appearance details for Frame A inverter models.
Provides dimensions and appearance details for Frame B inverter models.
Provides dimensions and appearance details for Frame C inverter models.
Provides dimensions and appearance details for Frame D inverter models.
Provides dimensions and appearance details for Frame E inverter models.
Provides dimensions and appearance details for Frame F inverter models.
Provides dimensions and appearance details for Frame G inverter models.
Provides dimensions and appearance details for Frame H inverter models.
Identifies and describes the key components of the inverter for different frames.
Covers essential aspects of installing and wiring the inverter, including safety and EMC.
Describes optional peripheral devices and their connection requirements.
Explains how to connect wires to the inverter terminals.
Provides instructions for flange mounting the inverter.
Describes the conduit box kits available for different inverter frames.
Identifies and explains the function of each component on the PU301 keypad.
Explains the different operation modes of the inverter and how they relate to frequency and starting sources.
Details the basic operational steps for various inverter modes like PU, external, and JOG.
Covers the essential steps for operating the inverter, including checks and running methods.
Lists and describes system parameters in group 00, including inverter model and firmware version.
Lists and describes basic parameters for group 01, focusing on frequency and voltage settings.
Covers parameters related to analog input and output terminals.
Covers parameters for digital input and output terminals.
Covers parameters for multi-speed operation and programmed operation modes.
Covers parameters related to motor specifications and automatic measurement.
Lists and describes various protection parameters for the inverter.
Covers parameters for communication protocols and settings.
Covers parameters for PID control.
Covers parameters for PG feedback.
Covers application-specific parameters for various control modes.
Covers parameters for speed and torque control.
Covers parameters for position control.
Covers parameters for special adjustments like slip compensation and vibration inhibition.
Covers parameters for tension control.
Covers user-registered parameters.
Lists daily and periodical inspection items for the inverter to prevent faults and ensure performance.
Explains methods for measuring voltage, current, and power on the inverter's main circuit.
Provides a comprehensive table of all parameters, their groups, settings, defaults, and pages.
Lists all possible alarm codes, their causes, and troubleshooting steps.
Lists all possible warning codes, their causes, and troubleshooting steps.
Provides a troubleshooting guide for common inverter problems and check points.
Details optional accessories like communication cards, keypads, and brake units.
Explains the inverter's compliance with European Low Voltage and EMC directives.
General
