24
Switching to [WALK] mode (walk assist mode)
1.
With your feet off the pedals and current speed at [0
km/h], hold down Y1 until [WALK] displays.
Y1
SW-E8000-L/SC-E8000
Y1
SW-E6000/SC-E6010
NOTE
A warning tone will sound while switching is in
progress if it is not possible to switch to [WALK] mode
because the current speed is not [0 km/h] or there is
pressure on the pedals etc.
2.
Release Y1 when [WALK] displays.
3.
Hold down Y1 again to activate walk assist.
•
Walk assist remains active provided Y1 is
being held down.
SC-E8000
SC-E6010
To Next Page
Loading...