46
RD protection reset
In order to protect the system from falls etc., if the bicycle is subjected to a strong impact, the RD Protection function
will operate and the connection between the motor and the link will be momentarily severed so that the rear derailleur
can no longer operate. Executing RD Protection Reset restores the connection between the motor and the link, as well as
the function of the rear derailleur.
1.
Press X1 or Y1 to select [OK].
X1Y1
SW-E8000-L/SC-E8000
X1
Y1
SW-E6000/SC-E6010
Configurable items Details
OK
RD Protection Reset will
operate
Cancel
To not execute RD
Protection Reset, select
[Cancel]
2.
Press A to confirm [OK], recover the connection
between the motor and the link by rotating the
crank.
A
SW-E8000-L/SC-E8000
A
SW-E6000/SC-E6010
Exit
Closes the menu list screen and returns to the basic screen.
1.
Press X1 or Y1 to select [Exit] on the menu list screen.
2.
Press A to confirm. After confirmation, the screen will return to the basic screen.
To Next Page
Loading...