To Next PageTo Next Page
Need help?Do you have a question about the Shimano BB-MT801 and is the answer not in the manual?
General| Brand | Shimano |
|---|---|
| Model | BB-MT801 |
| Category | Bicycle Accessories |
| Language | English |
Instructions for greasing and using SHIMANO tools to install bottom bracket cups.
Required torque values for installing bottom bracket components.
Step-by-step guide for inserting and pressing the bottom bracket into the shell.
Instructions for using the SHIMANO original tool to remove bottom bracket cups.
Steps for tapping the tool with a mallet to eject the bottom bracket cups.
Procedure to fully insert the right crank arm unit until it touches the bottom bracket.
Using SHIMANO tools to tighten the crank arm cap with specified torque.
Ensuring the stopper plate pin is secure before tightening left crank arm screws.
Tightening left crank arm screws alternately to the specified torque.
Setting up single chainrings with the marked side forward and tightening to spec.
Positioning the largest chainring with marked side outward and chain drop pin correctly.
Positioning the smallest chainring marked side inward with alignment tab under crank arm.
