Need help?Do you have a question about the Shimano BR-MT410 and is the answer not in the manual?
General| Type | Hydraulic Disc Brake |
|---|---|
| Mount Type | Post Mount |
| Piston | 2-piston |
| Brake Pad Material | Resin |
| Recommended Rotor Size | 160mm, 180mm, 203mm |
| Hose Joint | Straight |
| Brake Lever Material | Aluminum |
| Recommended Use | Mountain Biking |
| Brake Lever Reach Adjustment | Yes |
| Rotor Compatibility | Center Lock |
Procedure for attaching the brake lever to the handlebar.
Steps to mount and secure the disc brake rotor onto the hub.
Procedure for disassembling the disc brake rotor from the hub.
Instructions for fitting the brake caliper to the frame.
Mounting procedures for post mount caliper types.
Mounting procedures for international-standard caliper types.
Guidance on connecting the brake hose to the system.
Explanation of the brake hose connection mechanism.
Procedure to determine the correct brake hose length.
Steps for accurately cutting the hydraulic brake hose.
Steps for connecting the brake hose to the brake lever.
Instructions on how to adjust the brake lever reach.
Procedure for replacing worn brake pads.
Steps for changing brake fluid and bleeding the system.
Procedure for safely draining old brake fluid.
Process for refilling and removing air from the brake system.
Steps for replacing the hydraulic brake hose.
Determining and cutting the correct length for a new brake hose.
Connecting the new brake hose to the brake lever.
Connecting the new brake hose to the brake caliper.
Procedure for servicing the brake caliper pistons.
To Next Page