What to do if I can't feel a click when connecting an electric wire to my Shimano Controller?
If you cannot feel a click when connecting an electric wire, it might be due to foreign matter inside the plug or satellite shifter connection port. Check these areas and use a blower to remove any debris. If the issue continues, consider replacing the satellite shifter.
General| Series | ULTEGRA |
|---|---|
| Shifter Style | STI (Shimano Total Integration) |
| Gear Options | 11-speed |
| Material | Aluminum |
| Compatibility | Road bikes |
Details DANGER, WARNING, and CAUTION classifications for safe operation.
Safety precautions for using dual control levers, including warnings.
Warning against using front brake parts as rear and vice-versa.
Step-by-step guide for mounting dual control levers on handlebars.
Instructions for routing and connecting brake cables to the lever.
Instructions on how to add satellite shifters to the setup.
Routing map and connection steps for the SW-RS801-T.
Steps for installing the SW-RS801-S satellite shifter.
General guide for fitting brake calipers to the frame.
Warning against using front brake parts as rear and vice-versa.
To Next Page