EasyManua.ls Logo

Shimpo DMT-01 - Firing Safety Guidelines

Default Icon
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DANGER
Odor occurs from heating element or insulating
material for the rst operation.
Please ventilate fully since gases that are harmful
to the human body could occur depending on the
variation of glaze or clay that is used.
This product is only for oxidized ring.
Please do not make reduction ring.
It may cause burn injury if you
touch kiln due to high temperature
of the outside of kiln. Especially,
be careful not to bring children
close to kiln.
It may cause burn injury, electrical shock or other
injury. Please do not to let children close to kiln
since the temperature of the kiln surface becomes
high during ring. Please be sure to lock the door to
prevent opening the door accidentally.
This may cause a re or electric shock.
It may cause an electrical shock or burn injury.
It may also cause disconnection or breakage of the
element.
Explosion could occur due to the sudden drop in
the temperature.
It may cause burn injury due to heated air unless
it drops down to normal temperature (under 40
)
inside furnace.
4.Firing
These are safety precautions regarding ring the kiln.
5
×
CAUTION
It may cause trouble
due to overheating.
Do not use in a place that is susceptible
to direct sunlight.
Ventilation
Please do not make reduction ring.
Never let unattended children use
kiln, or set kiln in a location that
children can reach.
Do not touch heating elements.
Do not open the door unless the
temperature has become normal.
Do not touch kiln due to high
temperature.
Do not insert or remove the
power plug during operation.
Do not pour water on the kiln
during ring.
×
WARNING
This may cause accident. These may catch on re.
Do not strike the heating elements
or insulating material with pottery
or kiln shelving.
Do not put clothes near the kiln.
Do not hang up cloth near the kiln.