How to fix Shinco SDO-10D Dehumidifier that doesn't work?
If your Shinco Dehumidifier isn't working, first, ensure the power plug is securely connected to the socket. Next, check the water tank. If it's full, empty it, and make sure the tank is correctly placed back into the unit. Lastly, confirm that the room temperature is within the operating range of 5-32°C.
What to do if there is no outlet air from Shinco SDO-10D Dehumidifier?
If there's no air coming out of your Shinco Dehumidifier, it might be due to a blocked air outlet or inlet. Make sure to clean both the air outlet and air inlet to ensure proper airflow.
Why is my Shinco Dehumidifier leaking water?
If your Shinco Dehumidifier is leaking water, check the drainage pipe to ensure it's tightly connected. Also, inspect the pipe for any blockages and remove any debris present.
Controls power, displays current humidity level, and indicates status.
Recommended distances for optimal air circulation and placement.
Solutions for issues like non-starting or poor drying performance.
Explanation of error codes (E2, P1, FL) and their solutions.
Detailed technical data including voltage, power, capacity, and dimensions.
Controls power, displays current humidity level, and indicates status.
Recommended distances for optimal air circulation and placement.
Solutions for issues like non-starting or poor drying performance.
Explanation of error codes (E2, P1, FL) and their solutions.
Detailed technical data including voltage, power, capacity, and dimensions.
General| Model | SDO-10D |
|---|---|
| Dehumidification Capacity | 10 liters/day |
| Water Tank Capacity | 2 liters |
| Moisture Removal Capacity | 10 liters/day |
| Operating Temperature | 5°C - 35°C |
To Next Page
