What to do if my Shine KITCHEN Juicer stops during operation?
If your Shine KITCHEN Juicer stops while you're using it, try these steps: First, use the REV button to dislodge any pulp or produce that might be stuck. Next, try feeding the juicer at a slower pace. Also, make sure you cut your produce into smaller pieces before feeding them into the juicer.
Why Shine KITCHEN Juicer motor does not turn on?
If the motor of your Shine KITCHEN Juicer isn't turning on, ensure the power cord is properly plugged into a working socket. Also, verify that all the parts of the juicer have been assembled correctly. If the juicer shut off due to overheating, allow it to cool down before attempting to restart it.
What to do if there is a leak from the bottom of the Auger Housing of my Shine KITCHEN Juicer?
If you notice a leak from the bottom of the Auger Housing of your Shine KITCHEN Juicer, first check that the silicone sealing ring is correctly placed at the bottom center. Next, inspect the silicone sealing ring for any damage. Also, try feeding the juicer at a slower pace.
Why does the Auger Housing move while juicing with my Shine KITCHEN Juicer?
The movement of the Auger Housing during juicing with your Shine KITCHEN Juicer is normal. It is designed to reduce strain on the moving parts.
Check power cord, assembly, overheating; contact customer service if issues persist.
Address pulp buildup or hard objects in the chute using REV or contacting service.
Use REV, feed slower, cut produce smaller, or contact customer service.
Check sealing ring placement/damage, feed slower, or contact customer service.
Normal operation noise indicating reduced strain on moving parts.
General| Brand | Shine KITCHEN |
|---|---|
| Model | SJV-107-A |
| Category | Juicer |
| Language | English |
To Next Page
