Shining 3D FreeScan UE Pro - Introduction and Setup; Foreword and Safety

FreeScan UE Pro_ User Manual _V1.2.2 I
Foreword
General
The Manual introduces the information concerning the installation and the use of FreeScan UE Pro
(hereinafter referred to as the “Scanner”).
Safety Instructions
Signal
Meaning
Additional information for particular situation.
Improper actions or conditions that may damage the product or injury, and
consequently void your warranty or service contract or lose the customer data or
system data.
The safety instructions that you must precisely follow to avoid injury. Failure to
observe can cause damages to your product, or result in personal injuries.
About the Manual
The User Manual is related to your safety, lawful rights and responsibilities. Read it carefully before
installing and using the product.
⚫ SHINING 3D Tech Co., Ltd. (hereinafter referred to as “the Company”) owns complete intellectual
property rights for the contents of this User Manual and, without the written consent of the Company, it
is not allowed to copy, transmit, publish, reedit, compile or translate any contents of this Manual for any
purpose or in any form.
⚫ The Manual is a guidance for installing, operating, and maintaining the product, including the Device,
software, or other products provided by the Company, to which the Manual is applicable. The Manual
does not serve as the quality guaranty for the product. While the Company makes all efforts to ensure
the applicability of the content of the Manual, it reserves the right to interpret and modify the content of
the Manual and possible errors and omissions therein. The contents of the Manual are subject to changes
without further notice.
⚫ Images and diagrams in the Manual are presented to provide convenience to readers. In the event that
any images or diagrams are inconsistent with the physical product, the latter shall prevail.
⚫ It is recommended that professionals or technicians shall operate and/or use relevant Products. The
Company shall not be held responsible for any damages and/or losses caused by negligence,
environmental factors, or improper maintenance and use, or any other factors other than due to the
quality of the Product.
⚫ Disputes arising from the Manual and related Products thereof shall be governed by the laws of the
People’s Republic of China.
⚫ In the event of any ambiguity and/or any advice on the contents of the Manual, contact us by the contact