Need help?Do you have a question about the Shining 3D EINSTAR and is the answer not in the manual?
General| Scan Accuracy | 0.1 mm |
|---|---|
| Connectivity | USB 3.0 |
| Color Scanning | Yes |
| Texture Scanning | Yes |
| Resolution | 0.1 mm |
| Scan Speed | up to 14 frames per second |
| Output Formats | OBJ, STL, PLY, ASC |
| Weight | 500g |
| Outdoor Scanning | No |
| Alignment Mode | Feature, Marker, Hybrid |
| Scanning Speed | up to 14 frames per second |
| Power Supply | USB powered |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% |
| Point Distance | 0.1 mm - 3 mm |
Lists all items included with the Einstar 3D scanner.
Specifies the minimum hardware and software needed to operate the scanner.
Instructions on how to connect the scanner cable to the device.
Guide to connecting the power adapter and turning on the scanner.
Details on connecting the scanner to a computer via USB.
Outlines the object characteristics suitable for scanning.
Precautions to prevent damage to the scanner and its components.
To Next Page
