Need help?Do you have a question about the Shinkawa CV-86 Series and is the answer not in the manual?
General| Brand | Shinkawa |
|---|---|
| Model | CV-86 Series |
| Category | Transducer |
| Language | English |
Important safety warnings and precautions to prevent damage or injury during use and installation.
Instructions for inspecting the unit for damage and proper storage conditions before initial use.
Overview of the Model CV-86 Series Piezoelectric Velocity Transducer and its applications.
Illustrates a typical system setup for the CV-86 transducer with monitoring devices.
Overview of CV-861/EX and CV-862/EX models, including standard, drip-proof, and integral cable types.
Detailed technical parameters such as sensitivity, frequency response, vibration limits, and protection ratings.
Procedure for visually inspecting the transducer for shipping damage upon receipt.
Guidelines for temporarily storing the transducers, including prohibited locations and conditions.
General information on mounting the CV-86 transducer using the attached mounting stud.
Step-by-step instructions for drilling, cleaning, and securing the transducer during installation.
Steps for securely connecting the transducer's connector and preventing loosening due to vibration.
Guidelines for cabling, including cable type, length limits, routing, and bend radius.
Instructions for wiring the CV-86 transducer, including power source requirements and typical wiring diagrams.
Periodic checks to ensure satisfactory operation, including transducer mounting and cable connections.
Intrinsic safety information for TIIS certification, including circuit diagrams and parameters (Japanese).
Intrinsic safety certificate details from NEPSI, including model, explosion marking, and parameters (Chinese).
Details of the explosion protection certificate issued by NEPSI, including parameters and validity.
Safety certification details from KTL for CV-861 model, including product overview and usage conditions (Korean).
To Next Page