Need help?Do you have a question about the Shinkawa VM-5K and is the answer not in the manual?
Provides critical safety instructions for grounding, wiring, handling components, and operation.
Covers face plate withdrawal, internal access, key operations, and DIP switch settings.
Explains configuration, hierarchy, display content, and key operations for Parameter Setting 1.
Explains configuration, hierarchy, display content, and key operations for Parameter Setting 2.
Covers trigger level, hysteresis, target forms, and trigger mode selection for optimal detection.
Details monitor/pulse output selection and speed relay hysteresis settings.
Covers adjusting measured value span and recorder output zero and span.
Flowchart to diagnose and resolve issues with abnormal or blank LCD displays.
Flowchart to diagnose causes of flashing OK display, including sensor wire breakage or short-circuit.
Flowchart to diagnose abnormal measured values, checking trigger, hysteresis, and noise.
Flowchart to diagnose why the speed relay is not operating, checking bypass and measurement ranges.
Flowcharts for erroneous speed relay operation, OK alarm non-operation, and no recorder output.
To Next Page
General