Need help?Do you have a question about the Shinko CHC-S1245 and is the answer not in the manual?
Safety precautions for placing the printer in suitable environments to avoid hazards.
Guidelines for safely lifting, moving, and handling the printer to prevent injury or damage.
Instructions for handling ink ribbon, paper, and printed output safely and properly.
Detailed steps for unpacking the printer and identifying its components.
Instructions on how to safely remove protective materials from the printer after unpacking.
Procedure for correctly loading the ink ribbon into the printer.
Step-by-step guide for loading paper into the printer cassette.
Instructions and safety precautions for connecting the power cord.
Guide on how to connect the printer to a computer using a USB cable.
Location and operation of the printer's power switch.
Overview of the printer's control panel, including buttons, LEDs, and LCD display.
Guide to accessing and using the Set Up Mode for tests and settings.
Monthly maintenance procedure for cleaning key printer components to ensure print quality.
Instructions for cleaning the printer's exterior cabinet and dust filter.
Table listing LCD error messages, their status, and corresponding corrective actions.
Detailed steps to resolve a paper jam issue in the printer.
Troubleshooting guide for vertical lines or spots appearing on printed output.
Procedure to fix issues where ink ribbon or paper detection fails due to sensor cleanliness.
Steps to take if the printer loses power during an active printing job.
Contact information and guidance for obtaining after-sales service and support.
To Next Page
General