To Next PageTo Next PageWhy won't my Ship To Shore Ultrasonic Jewelry Cleaner start?
If your Ship To Shore Ultrasonic Jewelry Cleaner won't start, the automatic overheating safety shut-off feature may have tripped. Allow a fifteen-minute cool-down period before trying to use the cleaner again.
General| Brand | Ship To Shore |
|---|---|
| Model | 95563 |
| Category | Ultrasonic Jewelry Cleaner |
| Language | English |
Safety instructions to minimize electrocution risks, including unplugging immediately after use.
Precautions for safe operation, especially around children, and handling of cords and openings.
Ensure the cleaner is off and unplugged before performing any cleaning procedures to prevent accidental operation.
Steps for cleaning the tank after use, focusing on damp cloth cleaning and avoiding flammable liquids.
Service must be performed by qualified personnel; use only identical replacement parts to avoid injury.
Inspect unit before each use and store indoors in a dry, secure location away from children.
Key operational safety points including environment, pacemakers, immersion, and fluid types.
Step-by-step guide on filling the tank, selecting cleaning cycles, and operating the unit.
Using the 'TC' button activates the heat function; a red light indicates it is on.
Automatic safety shut-off prevents overheating; limit use to 3 cycles in 15 minutes.
Ensure the product is plugged into a properly installed and grounded outlet for safety.
Guidelines for using temporary adapters and three-wire extension cords correctly.
Details electrical specifications including voltage, wattage, and power cord type.
Provides tank dimensions, capacity, heated water temperature, and ultrasonic frequency.
Covers defects in materials and workmanship for 90 days, excluding misuse and normal wear.
Instructions for returning the product with proof of purchase for warranty service.
