SHOCKERHITCH AIR EQUALIZER

To Next Page

SHOCKERHITCH®

AIR EQUALIZER SHOCKERHITCH

SETUP INSTRUCTIONS

Thank you for choosing a SHOCKERHITCH

Installation:

Page 1

STEP 1

Measure your existing ball height from the

ground for future reference.

STEP 2

Remove your weight distribution head from

existing shank.

STEP 3

Assemble the Air Equalizer Shockerhitch to the

Shocker XR adjustable channel using supplied

5/8" pins. Slide assembly into the receiver tube

on tow vehicle.

STEP 4

Install your existing weight distribution head on

the Air Equalizer bar using your original

mounting bolts.

Need help?

Do you have a question about the SHOCKERHITCH AIR EQUALIZER and is the answer not in the manual?

Summary

Setup Instructions

Step 1: Measure Ball Height

Measure existing ball height from the ground for future reference.

Step 2: Remove Weight Distribution Head

Remove your weight distribution head from the existing shank.

Step 3: Assemble Shockerhitch

Assemble the Air Equalizer Shockerhitch to the adjustable channel using supplied 5/8" pins.

Step 4: Install Weight Distribution Head

Install your existing weight distribution head on the Air Equalizer bar using your original mounting bolts.

Step 5: Remeasure Ball Height

Remeasure ball height and select pin location on channel mount matching original measurement.

Step 6: Hook Up Weight Distribution Bars

Hook up your weight distribution bars as before, potentially removing air from the equalizer.

Setting Air Pressure

Safety Notice

Maintenance