How to Assemble the Handle Bars
3. Attach handlebar to riser using 4
enclosed screws as per diagram.
Tighten screws with included tool. Do
not over tighten.
WARNING: Riding a scooter is a dangerous activity. It is your responsibility to ride
safely and within your abilities.
Proper assembly is vital to the safe operation of your scooter. Seek professional
advice if you are unsure about any aspect of the assembly outlined in this manual.
4. Turn on the electronic display
and familiarise yourself with its
function before riding.
1. Remove the electric
scooter from its box and
unfold it. Lock riser in upright
position. Plug handlebar wire
loom into riser wire loom.
UNFOLDING
Press the folding lever to release the
mechanism. Then raise the riser to the upright
position. Then a "Click" sound will be heard
as it locks into position.
FOLDING
Push forward on the handlebar and your foot
press the folding lever down. Collapse riser to
rear fender until locked.
"Click"
Unfolding and Folding your Scooter
WARNING: Grip the handlebars with your hands while your foot is firmly on the platform
and pull back 2-3 times to ensure the folding mechanism is securely locked.
Page 2
To Next Page
Loading...
