Shogun ES50 User Manual

ES50 e-SCOOTER
What’s in the box
Each state and territory in Australia has a
different set of rules and regulations
pertaining to the usage of e-scooters
(including where e-scooters can legally be
used and whether e-scooters need to be
registered with relevant road traffic authority).
Any user of this scooter must ensure that they
check and abide by their local by-laws and
use responsibly. Ride with caution and always
wear a helmet and protective gear when
riding this scooter.
- Electric scooter
- Handlebar
- Power adapter
- Instruction manual
- Screws x 4
- Allen key
Dashboard
Electronic
Accelerator
Brake Lever
Bell
Charge Port
Folding Switch
Disc Brake
Brake Light
Front Light
Hook
Motor
Stand
Battery
compartment
Dashboard Display
Power switch. Press once to turn on. Press once again to turn lights on. Press again to
turn lights off. Press and hold for 3 seconds to turn scooter off.
Battery Level Indicator. Five-bar displayed means that the charge is between 100%-
86%; four-bar displayed means the charge is between 85%-71%, and so on. When
there is only one bar left, the power is about to run out, please recharge.
FOLDING Grip riser with one hand, slide safety button on side of quick release lever upwards. Then
pull quick release forward and fold riser gently back to rear guard. Then raise the spring loaded
latch on rear guard and engage with hook on handlebar.
UNFOLDING Release hook from latch from rear guard and unfold riser to up right position. Press
quick release lever firmly to riser until it clicks into position.
WARNING: Grip the handlebars with your hands while your foot is firmly on the platform pull back
2-3 times to ensure the folding mechanism is securely locked.
Folding and Unfolding your Scooter
Page 1

Shogun ES50 Specifications

General

Brand	Shogun
Model	ES50
Category	Scooter
Language	English

Summary

ES50 e-SCOOTER Introduction and Basic Operation

Safety and Usage Regulations

Legal requirements and safe riding advice for e-scooters in Australia.

What's in the box

Lists the components included with the electric scooter package.

Dashboard Display Functions

Explains the power switch and battery level indicator on the scooter's dashboard.

Folding and Unfolding Instructions

Step-by-step instructions for folding and unfolding the e-scooter.

Scooter Assembly and Charger Connection

Assembly Steps

Instructions for assembling the handlebar and familiarizing with the display.

Charger Connection Guide

Steps for connecting the charger to the e-scooter, including opening and closing the port.

Getting Started: Riding the e-Scooter

Essential Safety Precautions

Emphasizes wearing helmets and protective gear during scooter use.

Powering On and Off

Details the process of powering the scooter on, turning lights on/off, and powering off.

Riding Techniques and Controls

Guides on pushing off, accelerating, decelerating, braking, and cornering.

Safety, Maintenance, and Specifications

General Safety Warnings and Guidelines

Comprehensive list of do's and don'ts for safe scooter operation and usage.

Battery and Power Adapter Precautions

Warnings related to battery handling, charging, and power adapter usage.

Daily Maintenance and Cleaning Procedures

Recommendations for pre-ride checks, cleaning procedures, and battery care.

Technical Specifications Overview

Details on scooter dimensions, weight, load, speed, battery, motor, and charger specifications.