shokz OPENCOMM 2 UC User Manual

userguide.shokz.net/opencomm2uc
Please refer to the following
for more details
Click once
Answer call
Click once
Play/pause music
Click once
End call
Double-click while music is playing
Next song
6.Button
*Position the noise-canceling microphone close to your mouth.
8.How to Wear
4.Pairing to PC
1. Start with your headset turned on.
2. Plug the included USB adapter into a USB port on your PC.
3. Connection is established when Audrey says "connected",
and the LED Indicator on the USB adapter is solid blue.
5.Configure
Shokz Loop110
Connected
SELECT THE SOUND DEVICE：
*To play music or take calls on the headset, please ensure the “Shokz Loop110”
is both identified as the default input and output devices in your operating system’s
audio settings.
7.Reconnect to the last
connected headset :
LED：Flashes blue every second
Click once
Volume- Button
Power/Volume+ Button
1.ON/OFF
Turn off the headset
Turn on the headset
Press and hold the
Power/Volume+ Button for
2 seconds until the LED
Indicator flashes blue.
Press and hold the
Power/Volume+ Button for
3 seconds until the LED
Indicator flashes red.
Operate controls with your headset powered off.
1. Start with your headset turned
off.
2. Press and
hold the Volume+ Button until the LED
Indicator
flashes red and blue alternately.
2.Pairing to Mobile Device
OpenComm2 UC by Shokz
Settings
BLUETOOTH
3. Select "OpenComm2 UC by Shokz" on your device's Bluetooth settings.
Audrey will say, "connected".
3.Pairing to Mobile Device
User Guide
C110
8000500222（A0）
Multifunction Button
Loop110
USB-C
Loop110
USB-A
Multifunction Button
Loop110
USB-C
Loop110
USB-A
Mute/unmute microphone
Click once when on a call
Triple-click while music is playing
Previous song

shokz OPENCOMM 2 UC Specifications

General

Connectivity	Bluetooth 5.1
Battery Life	Up to 16 hours
Listen Time	Up to 8 hours
Charging Time	2 hours
Water Resistance	IP55
Wireless	Yes
Multipoint Pairing	Yes
Color	Black
Microphone Type	Boom microphone
Type	Open-Ear
Technology	Bone conduction technology
Compatibility	PC and Mac
Wearing Style	Over ear

Summary

ON/OFF

Turn on the headset

Press and hold the Power/Volume+ Button for 2 seconds until the LED Indicator flashes blue.

Turn off the headset

Press and hold the Power/Volume+ Button for 3 seconds until the LED Indicator flashes red.

Pairing to Mobile Device

Initiate Mobile Pairing

Press and hold the Volume+ Button until the LED Indicator flashes red and blue alternately.

Select Device on Phone

Select 'OpenComm2 UC by Shokz' in your device's Bluetooth settings. Audrey will say 'connected'.

Pairing to PC

Connect to PC via USB Adapter

Plug the included USB adapter into a USB port on your PC. Connection is established when Audrey says 'connected'.

Configure Sound Device

Set as Default Audio Device

Ensure 'Shokz Loop110' is identified as default input/output in your operating system's audio settings.

Button Functions

Control Calls and Music

Click once to answer/end calls, play/pause music. Double-click for next, triple-click for previous song.

Microphone Mute Control

Click the Mute Button once when on a call to mute or unmute the microphone.

Reconnect to Last Connected Headset

Reconnect via USB Adapter

Click the Multifunction Button once. LED flashes blue every second to indicate reconnection.

How to Wear

Proper Headset Placement

Position the noise-canceling microphone close to your mouth for optimal communication performance.