To Next PageTo Next PageWhy is my Shop-Vac Vacuum Cleaner losing suction?
Loss of suction in your Shop-Vac Vacuum Cleaner can occur due to several reasons: * A loose hose connection. Try tightening the hose connection. * A clogged filter. Clean or replace the filter. * A full tank. Empty the tank. * A hole in the hose. Replace the hose.
What to do if my Shop-Vac Vacuum Cleaner is discharging dust from the exhaust?
If your Shop-Vac Vacuum Cleaner is discharging dust from the exhaust, it could be due to: * The filter is not installed or not installed properly. Properly install the filter. * The filter is damaged. Replace the filter. * The filter is clogged, or the dust is too fine. Use a more efficient filter. * The filter is not functional. Clean or replace the filter.
Why am I getting static shock from my Shop-Vac SSP16 Vacuum Cleaner?
Static shock from your Shop-Vac Vacuum Cleaner can happen because of a dry environment. Try to add moisture to the air, if practical, by using a console or installed humidifier. If the relative humidity of the air is low, this situation is temporary and does not affect the use of the vacuum cleaner.
General| Brand | Shop-Vac |
|---|---|
| Model | SSP16 SERIES |
| Category | Vacuum Cleaner |
| Language | English |
General safety precautions to reduce risks of fire, electric shock, or injury during operation.
Guidance on proper grounding procedures to prevent electric shock.
Guidance on installing and maintaining various filter types for optimal performance.
Procedures for using the vacuum for wet pick up, including filter requirements.
Detailed steps for operating the pump feature for liquid removal.
