21
Trouble Shooting
If your scooter will not start:
Make sure that the key switch is turned on? If it is, the battery condition gauge will be
operating.
If the battery condition gauge fails to operate when the key switch is in the “on”
position, check the following:
Make sure the battery charger is not plugged into the wall outlet. This will prevent drive.
If your scooter does not slow down, or the variable speed control does not work:
1. Turn off the power "on" key switch.
2. Inform your authorized Shoprider dealer.
CAUTION: If you find for any reason that your scooter doesn’t reduce speed when you let
go of the forward-reverse throttle, switch your scooter “off” with the on/off key. The
parking brake will activate immediately and stop your scooter. Be aware that the scooter
will stop very suddenly, so brace yourself with the handlebars; sit back on your seat.
If you feel for any reason that your scooter is not driving correctly, or is making an
unusual noise, stop using the scooter. Be SAFE, Contact your Shoprider dealer, who will
be able to advise you.
GENERAL DESCRIPTION: The scooter controller system incorporates a sophisticated
microprocessor design. It is located under the cover of your scooter. The scooter
controller continually monitors the scooter system, and ensures safe and reliable
operation.
SAFETY CONDITIONS MONITORED INCLUDE
• Speed control system integrity
• Internal voltages and circuits
• Motor voltages and circuits
• Safety isolate relay
• Battery voltage
To ensure safety, the controller will not operate if the speed thumb lever (throttle) is not in
the neutral position.
To Next Page
Loading...
Need help?
General