ShoreLand'r SLB46TBLSP User Manual

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003555
Page 1
®
SLB46TBLSP
Bundles Required for SLB46TBLSP
69082 Literature Bag - Trailers - Brakes 1
80482-- Frame Bundle - 2X5 - B46TBLSP 1
4300236 ST185/80R 13C MR Tire / TS Dir Rim 4
67178-- Tongue Assembly w/UFP Disc 5x3x65 1
6238600 Rocker Bag - Tandem 1
66520 Bag w/Chains - No Coupler 1
Table of Contents: Page
Frame Drawing & Bill of Materials ................................2-3
Safety Instructions ........................................................3
Tongue & Safety Chain Dwg/BOM/Assy Instr. ..............4-5
SP Winch Dwg/BOM/Assy Instr. ...................................5-7
Tire Size & Carrying Capacity Chart .............................8
Spring Assembly Instructions .......................................8
Chassis Drawing & Bill of Materials .............................. 8-9
Axle Assembly Instructions ...........................................9
Tire & Wheel Assembly ................................................9
Bunk Assembly Instructions .........................................10
Trailer Adjustments .......................................................10
Axle Adjustments ..........................................................10
Winch Post Adjustments ...............................................10
ShoreLand’r offers their product line in either galvanized or painted
finish. When ordering parts it is important that you specify the finish
or color you have on your product. The five (5) digit number along
with a two (2) digit space _ _, note the parts which can be purchased
with various finishes. When ordering these items use the five (5) digit
number along with a two (2) digit suffix for the proper finish.
00 .........Galvanized
01 .........Arctic White
03 .........Black
33 .........Galvanized w/Black Plastic Parts

ShoreLand'r SLB46TBLSP Specifications

General

Brand	ShoreLand'r
Model	SLB46TBLSP
Category	Utility Vehicle
Language	English

Summary

Final Assembly Instructions

B-Series Bunk Assembly

Assemble bunk supports and equalizer arms, aligning U-bolts and securing.

Tongue Assembly and Systems

Tongue Installation and Ground Wire

Install tongue, connect wiring, and attach white ground wire for trailer lighting.

Safety Chain Attachment

Secure safety chains using hex bolts, flat washers, and flange lock nuts.

Brake Line Connection

Connect brake line from actuator to trailer frame, ensuring no kinks.

Winch Post Installation

Winch Post Mounting

Position winch post on tongue, secure with U-bolts and lock nuts, allowing adjustment.

Winch Handle Attachment

Attach winch handle to drive shaft; remove for transport to prevent loss.

Axle and Spring Systems

Rocker Arm Installation

Install rocker arms with grease zerks down, securing with bolts and ensuring access.

Spring Mounting

Mount springs on axles, align hook ends, and secure with U-bolts and clamps.

Trailer Adjustments

Axle Position Adjustment

Adjust axle position to achieve 5-7% tongue weight for safe towing.

Rear Support and Bunk Adjustment

Adjust rear cross member and bunks for boat support and clearance.

Winch Post Positioning

Adjust winch post for bow roller alignment with bow eye.

Safety Instructions

Pre-Towing Safety Checklist

Verify fastener tightness, tiedowns, tire inflation, bearings, coupler, and lights before towing.