EasyManua.ls Logo

Shoremaster Infinity RS4 - User Manual

Shoremaster Infinity RS4
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INFINITY RS4 DOCK SYSTEM
PRODUCT ASSEMBLY INSTRUCTIONS
CAUTION - PUT SAFETY FIRST
RS4 INFINITY DOCK
Instructions and Safety Tips
Bolt Bag Part #: 1004425
4 x 4 Section Part #: 1004214
4 x 10 Section Part #: 1005986
4 x 12 Section Part #: 1005987
6 x 8 Section Part #: 1005989
3ft Dock Corner Part #: 1005990
45
° Curved Dock Part #: 1003953
90° Curved Dock Part #: 1003954
CAUTION - PUT SAFETY FIRST
Before attempting to install or use this dock, study and fully understand the proper operating procedures and safety precautions
outlined in this owner's manual. If you have any questions about assembly, installation, use or suitability of this product, contact
an authorized dealer.
NOT COMPLYING WITH THE PROCEDURES AND PRECAUTIONS OUTLINED IN THIS MANUAL WILL INVALIDATE THE
WARRANTY AND MAY RESULT IN PERSONAL INJURY OR DEATH.
Be sure your dock can be installed on a firm and stable foundation. If lake bottom does not allow for a secure installation, this
product may not be suitable. ShoreMaster builds a wide variety of docks. Call your dealer for suggestions or other options.
Install high enough above water surface, so waves do not contact Dock Frames or Panels.
Do not dropped parts in the water. Please remove any Leg Caps or other parts from lake bottom to avoid injury.
Do not run on dock. Running on dock could result in a falling injury. Use caution, especially when surface is wet.
Do not dive off dock. Diving off dock could result in a severe head, neck, or back injury or death.
Read and fully understand each step before proceeding with that step.
Wear protective gloves, clothing and eyewear when assembling and installing the dock.
Do not assemble, install or use this product if items are missing or damaged.
RS4 INFINITY DOCK
Instructions and Safety Tips
Bolt Bag Part #: 1004425
4 x 4 Section Part #: 1004214
4 x 10 Section Part #: 1005986
4 x 12 Section Part #: 1005987
6 x 8 Section Part #: 1005989
3ft Dock Corner Part #: 1005990
45
° Curved Dock Part #: 1003953
90° Curved Dock Part #: 1003954
CAUTION - PUT SAFETY FIRST
Before attempting to install or use this dock, study and fully understand the proper operating procedures and safety precautions
outlined in this owner's manual. If you have any questions about assembly, installation, use or suitability of this product, contact
an authorized dealer.
▪ NOT COMPLYING WITH THE PROCEDURES AND PRECAUTIONS OUTLINED IN THIS MANUAL WILL INVALIDATE THE
WARRANTY AND MAY RESULT IN PERSONAL INJURY OR DEATH.
▪ Be sure your dock can be installed on a firm and stable foundation. If lake bottom does not allow for a secure installation, this
product may not be suitable. ShoreMaster builds a wide variety of docks. Call your dealer for suggestions or other options.
▪ Install high enough above water surface, so waves do not contact Dock Frames or Panels.
▪ Do not dropped parts in the water. Please remove any Leg Caps or other parts from lake bottom to avoid injury.
▪ Do not run on dock. Running on dock could result in a falling injury. Use caution, especially when surface is wet.
▪ Do not dive off dock. Diving off dock could result in a severe head, neck, or back injury or death.
Read and fully understand each step before proceeding with that step.
Wear protective gloves, clothing and eyewear when assembling and installing the dock.
Do not assemble, install or use this product if items are missing or damaged.
Question and Answer IconNeed help?

Do you have a question about the Shoremaster Infinity RS4 and is the answer not in the manual?

Shoremaster Infinity RS4 Specifications

General IconGeneral
BrandShoremaster
ModelInfinity RS4
CategoryMarine Equipment
LanguageEnglish