PinCollect
PinCollect is a simple feature that
allows you to get the most out
of your statistics by collecting
the position of the pin. When
you reach a green, your device
will automatically change to the
PinCollect screen. This screen
shows the numbers 1-3, which
represent the number of putts taken
on the hole. On the following screen
a 0 or 4 putt can be recorded. Once
you have holed out, stand over the
hole and press the button next to
the number which correlates with
the amount of putts taken. This will
save the pin location for that hole.
15
Step 4: During Play (cont)
How to record a penalty on course?
Navigate to the penalties screen by pressing the top left
RJSZGZYYTS9MJܪWXYTUYNTSNXѢ5JSFQYNJXѣUWJXXYMJYTU
WNLMYGZYYTSYTHTSܪWRYMJXJQJHYNTS>TZHFSYMJSH^HQJ
through the different penalty options and select the one that
is relevant to you. There is more information about using
penalties on the support site:
support.shotscope.com
What if I forget to PinCollect?
Although the device will remind you to do so on every green,
forgetting is still easily done! If you do forget, you can add the
pin position in editing and move your putts as required. There will
be more on the editing feature later.
Scrolling between holes
<MJS^TZܪSNXMFMTQJYMJIJ[NHJ
will automatically change to the next
hole. If you need to manually change
the hole the device is on you can
do this by pressing the bottom right
button to go forward and the bottom
left button to go back.
To Next Page
Loading...
Need help?
General
