SHOTO SDA10-4850 User Manual

Details the applications of SDA10 series LiFePO4 battery and its key advantages like high energy density and long life.

Describes the Shoto SDA10 series battery as LiFePO4, its anode/cathode, capacity options, rack size, and BMS features.

Provides a table listing various SDA10 models with their voltage, capacity, dimensions, weight, and remarks.

Shows a diagram illustrating the layout and components on the front panel of the SDA10 series battery.

Details each component marked on the front panel, including its function and specific information.

Explains the meaning of different LED states (RUN, ALM, SOC) for various operational statuses.

Guides on setting up the ADD Dip Switch for communication address numbers in multi-pack configurations.

Provides guidelines for safely transporting the battery pack, emphasizing protection from environmental factors and mishandling.

Details recommended storage conditions, temperature, humidity, SOC, and periodic maintenance for long-term storage.

Details the steps for unboxing the battery pack from its packaging, including wooden and paper cartons.

Provides Method of Procedure (MOP) for installing new battery packs, covering rack insertion, cabling, and grounding.

Outlines the steps for commissioning the battery system, including PSU parameter setup, alarm checks, and power-on procedures.

Instructs on filling out the installation checklist after stable operation, using an Excel form for verification.

Details recommended charging current, setup limits, and how to determine if the battery is fully recharged.

Guides on performing battery discharge tests, setting discharge current, and calculating capacity based on duration.