SHOTO SDA10 Series User Manual

Lists applications and key advantages of the SDA10 series battery module.

Details the LiFePO4 chemistry, capacity options, and built-in BMS features of the battery.

Provides a table of model specifications including voltage, capacity, dimensions, and weight.

Illustrates and labels the components on the front panel of the battery pack.

Explains the function and marks of each front panel component for clarity.

Defines the meaning of the RUN, ALM, and SOC LED indicators for system status.

Guides on configuring communication addresses using the ADD dip switch settings.

Provides guidelines for safe transportation of the battery pack, covering handling and protection.

Outlines recommended storage conditions, temperature, humidity, and maintenance.

Covers safety precautions, handling, and operational environment for battery installation.

Lists essential tools for installation and highlights the importance of insulated tools.

Details the procedures for unpacking the battery module from its packaging.

Provides the Method of Procedure for installing new battery packs correctly.

Covers the final setup, parameter configuration, and power-on steps for the battery system.

Instructs on filling out the installation checklist after system setup and commissioning.

Provides guidelines for charging the battery, including current limits and verification methods.

Outlines the procedure for discharging the battery for capacity testing and calculation.