Need help?Do you have a question about the Showa Denko Shodex RI-101 and is the answer not in the manual?
Explains the fundamental working principle of the refractive index detector.
Details the technical specifications, ranges, and performance characteristics.
Guidelines for selecting an appropriate and interference-free location for the detector.
Specifies the electrical power needs and safety considerations for operation.
Instructions for carefully removing the detector from packaging and checking for damage.
Lists all the accessories included with the Shodex RI-101 detector.
Procedure to loosen transport locking screws to ensure detector stability.
Instructions for connecting power, tubing, and signal cables to the detector.
Guidance on selecting appropriate and safe solvents for mobile phase use.
Identifies all controls, indicators, and ports on the front panel of the unit.
Explains the function and operation of each key and display element.
Identifies all connectors and ports located on the rear of the detector.
Shows the side panel features, including the drain port.
Details the main operating screen, including status indicators and soft keys.
Configuration settings for the detector's start-up sequence.
Configuration settings for various operational parameters of the detector.
Lists and explains the various error messages and their potential causes.
A pre-operation checklist to ensure readiness and prevent issues.
Step-by-step procedures for starting the Shodex RI-101 detector.
Detailed instructions for cleaning the detector's flow cells to maintain performance.
Procedures for validating the detector's accuracy and reliability.
Accessing and using the maintenance screen for service personnel.
Guide for adjusting the detector's span calibration by service personnel.
Procedure for customers to validate the detector's span setting.
Precautions and procedures when using or leaving corrosive solvents in the detector.
Different methods for safely shutting down the detector.
Instructions for proper storage of the detector when not in use for extended periods.
Overview of common sources of malfunctions in the Shodex RI-101.
Steps to verify the detector's standalone functionality before system troubleshooting.
Strategies for pinpointing the source of a problem within the HPLC system.
A question-and-answer format detailing common issues, their causes, and solutions.
Visual flowcharts to guide users through diagnosing specific problems.
Identifies test points on circuit boards and their expected voltage readings.
Procedures related to the disassembly and maintenance of the optical block.
General guidelines and specific procedures for replacing internal components.
A comprehensive list of Shodex RI-101 components and their corresponding part numbers.
A chart indicating the miscibility of various solvents used in HPLC.
General| Type | Refractive Index Detector |
|---|---|
| Light Source | Tungsten lamp |
| Operating Temperature | 5 to 35 °C |
| Measurement Range | 1.00 to 1.75 RIU |
| Power Supply | 50/60 Hz |
| Drift | ±5×10^-7 RIU/hour |
To Next Page