Need help?Do you have a question about the SHP Laboklav 160 and is the answer not in the manual?
Explains graphical symbols for warning, important, and attention indications.
Highlights restrictions on manual access and electrical safety during installation/maintenance.
Provides essential safety guidelines for operating, installing, and maintaining the autoclave.
Details the procedure for immediate shutdown in case of emergencies using main switches or power plugs.
Explains each phase of the sterilization cycle, including preheating, deaeration, sterilization, and end of program.
Specifies power supply voltage, amperage, and crucial safety precautions for electrical connections.
Outlines the need for demineralized water, connection to supply, and tank filling procedures.
Explains the control panel layout, including the display and function of each button.
Provides guidelines for setting up the device on a flat surface, ensuring adequate space, ventilation, and leveling.
Details the procedure for switching on the sterilizer and what to expect on the display.
Describes how to open the sterilizer door safely, noting pressure conditions.
Guides on using loading systems and ensuring safe loading with protective equipment.
Details the process of closing the chamber door, emphasizing safety and proper seal.
Guides on navigating program menus, selecting programs, and entering access codes if required.
Guides on accessing and modifying program parameters via code entry and menu navigation.
Provides crucial safety advice for removing items, emphasizing hot steam and hot surfaces.
Lists common error codes (Er0101, Er0002, Er0103) and their causes.
Guides on cleaning goods, choosing wrapping materials, and proper loading.
Stresses the importance of regular cleaning, maintenance, and specialized service for optimal performance.
Highlights critical safety precautions, including disconnecting power and using trained personnel.
Guides on cleaning the chamber ring and interior, advising against harsh chemicals.
Details the procedure for annual safety valve checks and the need for replacement if faulty.
Details safety devices for preventing over-pressure, including alarms and safety valves.
Describes safety features preventing chamber opening under pressure or high temperatures.
General| Type | Autoclave |
|---|---|
| Capacity | 16 liters |
| Chamber Volume | 16 liters |
| Material (Chamber) | Stainless steel |
| Material | Stainless steel |
| Power Supply | 230 V / 50 Hz |
| Power Consumption | 2000 W |
| Control System | Microprocessor control |
| Display | Digital |
| Programs | Multiple preset programs |
| Safety Features | Overtemperature protection, overpressure protection |
| Dimensions | 400 mm x 500 mm x 600 mm |
| Cooling System | Natural convection |
| Sterilization Time | Adjustable, depending on the program |
To Next Page
