4 User Manual "Steam sterilizer Laboklav 55 - 195
"
General safety instructions:
Observe the following safety instructions for the operation of the autoclave!
Determination
• Only use the autoclave for the purpose defined in the operating instructions.
Power cord and power plug
• Never damage or change the power cord or power plug.
• Never operate the autoclave if the power cord or plug is damaged.
• Never unplug the power cord from the wall outlet. Always touch the power plug directly.
Installation
• Follow the instructions in this manual to install and operate the unit. We recommend that the
first commissioning be carried out by authorised specialist personnel of SHP Steriltechnik AG.
• Do not operate the autoclave in potentially explosive atmospheres.
• Only have the electrical connection set up by a specialist.
Program termination
• Note, that hot water steam can leave the chamber when the door is opened immediately after
a program has been stopped manually.
• Depending on the time of program termination, the load may be not sterile. Observe the
instructions on the display of the autoclave. You may need to sterilize the item again.
• Never open the door with force.
Removal of sterile goods
• Use gloves to remove the trays or bottom plate and wait until the everything has cooled down.
Never touch the sterile goods with unprotected hands. The parts can be hot.
• Check the packaging of the items to be sterilized for removal from the autoclave.
Maintenance
• Have the service carried out by authorized persons only.
Malfunctions
• If you get repeated error messages when operating the autoclave, put the autoclave out of
service and, if necessary, inform your specialist or authorized service.
• Have the autoclave repaired only by authorized persons.
To Next Page
Loading...
