Shrunks Tuckaire User Manual

PUMPS
Set up and supervision must be done by a competent adult. Depending on the model, your
inflatable travel bed may come with one of the following pumps.
We recommend using either of the following
rapid foot pumps for proper inflation:
The Shrunks’ Jetaire™ Electric Pump is also
recommended for achieving maximum
performance of the Travel Beds:
(We do not recommend inflating the Inflatable Bed by mouth)
INFLATION
More information on proper inflation is available on our website. Please view the
short how-to videos at www.theshrunks.com
Please note: Keep in mind the temperature of the air going into the product and the outside
air. If your inflator is hot and sending warm air into the product, when it cools, it will seem
like your product is losing air. This is normal. The product should be firm when completely
inflated, but allow a small depression when pushed on with your hand while in use. This is a
good evaluation of proper inflation. Proper inflation should be checked often if the product is
left inflated for consecutive days.
Valve #1 – Inflate this valve first
Valve #2 – Inflate this valve second
1. For both valves 1 and 2: Open valve stem
plug. Pull black rubber flap towards you to
close the air chamber. This allows air to
enter, but does not allow air to escape.
OPEN
CLOSE
PULL
VALVE #2
VALVE #1
VALVE #2
Inflate this valve second
VALVE #1
Inflate this valve first
RUBBER FLAP
OPEN
CLOSE
PULL
VALVE #2
VALVE #1
VALVE #2
Inflate this valve second
VALVE #1
Inflate this valve first
RUBBER FLAP
WARNING
Read these materials prior to assembling and using your Inflatable Bed, failure to
follow these instructions could result in serious injury or death.
- Set up and supervision must be done by a competent adult!
- The Inflatable Bed is not a life saving device!
- Ensure proper set up prior to use!
- Instruct children on proper use of this product!
- Over inflation is the major cause of leaks.
- Do not inflate with an air compressor or other high pressure pump.
This item is designed to be inflated with a high volume of air but at a low pressure.
- Read the instructions and warnings printed in this manual for proper inflation and safe use.
- Keep away from fire and other heat sources. Keep out of direct sunlight when
not in use.
- This unit is intended for domestic family use only and not for use in public areas or
as a rental.
- The Inflatable Bed should be inflated using any of the recommended pumps as indicated
on the following page.
SPECIFICATIONS
Inflatable Beds
Toddler Size - Manufacturer Item No. 85001
Kids Size - Manufacturer Item No. 88028
Parts included
1 - Repair Kit consisting of: 2pcs of self-adhesive repair patch
1 – Inflatable Mattress
1 – Pump
1 - Carrying Bag
Recommended Age: Toddler Bed 2+, Kids Bed 6+
Recommended Maximum Weight: 150lbs / 68 kg
Recommended maximum number of persons: 1 child per bed
Tuckaire
™
Inflatable Travel Bed
Instructions & Warnings
VALVE #2
VALVE #1
EN

Shrunks Tuckaire Specifications

General

Brand	Shrunks
Model	Tuckaire
Category	Indoor Furnishing
Language	English

Summary

General Safety Warnings

Setup and Supervision

Emphasizes that setup and supervision must be done by a competent adult.

Product Limitations

Highlights that the inflatable bed is not a life-saving device and is for domestic family use only.

Inflation Hazards

Warns against over-inflation, using high-pressure pumps, and keeping away from heat sources.

Pumps and Inflation

Recommended Pumps

Recommends rapid foot pumps and the Shrunks' Jetaire™ Electric Pump for proper inflation.

Inflation Process

Details the two-valve inflation process and the importance of checking firmness.

Temperature Effects

Explains how temperature changes can affect air pressure and firmness.

Deflation and Storage

Deflation Procedure

Provides steps to deflate the product by opening valves and flattening the bed.

Storage Guidelines

Advises storing the bed in a clean, dry place, protected from temperature variations.

Maintenance and Repairs

Regular Maintenance

Stresses regular inspection, cleaning, and checking storage for rodents and dryness.

Cleaning Instructions

Details cleaning with mild soap and water, avoiding harsh detergents and pressure washers.

Repairing Punctures

Outlines the conditions and steps for successfully patching punctures using the included kit.

Important Usage Rules

Do's and Don'ts

Lists essential instructions for safe use, including supervision and avoiding hazards.

Additional Warnings

Reinforces safety, warns against use near water, and disclaims liability for injuries.

Returns and Exchanges

Warranty Information

Directs users to the website for warranty and replacement issues.

Contact Information

Provides contact details for head office, USA logistics, and European logistics.