Shurco ShurLink PRO - User Manual

Questions and Answers

C
christopher38Aug 8, 2025
What to do if my Shurco ShurLink PRO is not listing the device?
- C
  Cassidy GeorgeAug 8, 2025
  If your ShurLink™ PRO remote control's display is working but the device isn't listed, try these steps: First, bring the remote closer to the receiver and ensure the receiver is powered on. You can check the receiver's power by removing the gray cover on the trailer and looking for a flashing red LED. If that doesn't work, delete the receiver from the remote and then re-introduce it. If problems persist, the remote or receiver might be damaged.
N
Nicole HernandezAug 14, 2025
Why is my Shurco ShurLink PRO motorized system running backwards?
- J
  Jessica WilliamsonAug 14, 2025
  If your motorized system runs backwards when controlled by both the Shurco Remote Control and the buttons on the receiver box, remove the gray cover from the receiver assembly and swap the green and yellow wires. Alternatively, use the ShurLink™ iOS app to pair your motorized system and switch the polarity in the app settings. If the device runs backwards only with the buttons on the receiver box, swap the positions of the push button switches in the gray cover of the receiver assembly.
P
phamhenryAug 22, 2025
How to fix a dead display on Shurco Remote Control?
- L
  Lori StevensAug 22, 2025
  If your Shurco Remote Control display is completely dead, try these steps: First, if the remote lid has been left open, close it and then reopen it to wake up the remote. If that doesn't work, the battery may be dead. Place the remote in the charging cradle, ensuring the charging cable is properly connected to both the power source and the cradle, and allow the remote to charge.
C
chasejuanAug 30, 2025
What to do if Shurco ShurLink PRO Remote Control motorized system runs in only one direction?
- B
  Barbara HamiltonAug 30, 2025
  If your motorized system runs in only one direction, start by removing the gray cover from the receiver assembly and ensuring the green and yellow wires are securely connected to the solenoid. Check if the push buttons on the gray cover work in both directions. Clear travel stops, but do not reset them, to see if the system operates in both directions, indicating corrupted travel stops. Also, check the encoder wire connections and reset the travel stops.

Summary

ShurLink PRO Components

Transmitter Remote Kit

Details the SHURLINK PRO™ Transmitter Remote Kit, including the remote, cradle, and charging cable.

Replacement Cradle

Information regarding the SHURLINK PRO™ Replacement Cradle for charging the remote.

USB Charging Cable

Specifies the USB Charging Cable Type A to C used for charging the remote.

Remote and Screen Overview

Power Up and Down

Explains how to power the remote up by opening the cover or pressing a button, and how it powers down.

Remote Control Layout

Identifies key physical components and buttons on the ShurLink PRO™ remote for operation.

ShurLink PRO Screen Layout

Describes the various elements and indicators displayed on the ShurLink PRO™ remote screen.

Pairing Devices

Introduction to Device Pairing

Explains the necessity of pairing for secure operation and introduces the initial pairing process steps.

Remote Pairing Procedure

Details the step-by-step process for pairing a new device with the remote via the menu.

Receiver and Mini Module Pairing

Provides specific instructions for pairing different types of receiver modules and mini modules.

Standard Operation (Express Mode)

Express Mode Operation Basics

Outlines the fundamental operation of the remote in Express Mode for motorized devices.

Setting Travel Stops

Guides users through setting open and closed travel stops for precise device control in Express Mode.

Clearing Travel Stops

Instructions on how to remove previously set travel stops for a device in Express Mode.

Setting Mid-Stops

Details the process for setting intermediate stopping points for device operation in Express Mode.

Deleting Paired Devices

Explains how to remove a specific device from the remote's memory.

Standard Operation (Dual-Output Devices)

Operating Dual-Output Devices

Describes how to control latching and momentary dual-output devices using the remote.

Device App Options

Remote Memory Clearing

Instructions for permanently clearing all paired devices from the remote's memory.

ShurLink App & Phone Pairing

Information on using the ShurLink app and pairing the remote with a smartphone via Bluetooth.

Troubleshooting Guide

Remote Unresponsive or Dead Display

Solutions for issues where the remote is unresponsive or has a completely dead display.

Device Not Listed or Responding

Troubleshooting steps for when a paired device does not appear on screen or respond to commands.

Motorized System Running Backwards

Addresses problems with motorized systems operating in the reverse direction.

Motorized System One-Way Operation

Solutions for systems that only operate in one direction, not the other.

System Not Running or Stuttering

Troubleshooting for systems that fail to run or operate erratically and stutter.

Incorrect Open;Closed Status Display

Resolves issues where the system status incorrectly shows as slightly open but is actually closed.

Express Mode Operation Errors

Guidance for when the system does not allow Express Mode operation or encounters errors.

Shurco ShurLink PRO Specifications

General

Brand	Shurco
Model	ShurLink PRO
Category	Remote Control
Language	English