EasyManua.ls Logo

Shure KSM32 - SPECIFICATIONS; Frequency Response; Maximum SPL; Dynamic Range

Shure KSM32
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
[
1
1 1 Pa=94 dB SPL
Electret Condenser
Cardioid
20
to 20,000 Hz
150
n
-36
dBV/Pa[
1
l (16.0 mV)
PAD ON
2500
0 load 154 dB
1 000
0 load 148 dB
PAD OFF
2500
0 load 1
39
dB
1 000
0 load 133 dB
81
dB
2500
0 load 126 dB
1000
0 load 119 dB
2500
0 load 9.0 dBV
1 000
0 load 3.0 dBV
13.0 dB SPL-A
:2:50dB
0,-15
dB
Flat,
-6
dB/octave below 115 Hz, or
-18
dB/octave below 80
Hz
Three-pin professional audio (XLR), male, balanced
Positive pressure
on
diaphragm produces positive voltage
on
pin
2 with respect to pin 3
11-52 V 0C[
4
l phantom power (IEC-61938), 4.7 mA
490 g (17 oz.)
[
2
lTHD of microphone preamplifier when applied input signal level
is
equivalent to cartrid{le output at specified
SPL
[
3
lS/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
[
4
lAII
specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower volt-
ages, but with slightly decreased headroom and sensitivity.
5

Related product manuals