Need help?Do you have a question about the Shure KSM44 and is the answer not in the manual?
General| Microphone Type | Condenser |
|---|---|
| Polar Pattern | Cardioid, Omnidirectional, Bidirectional |
| Frequency Response | 20 Hz - 20 kHz |
| Output Impedance | 50 ohms |
| Connector | XLR |
| Sensitivity | -31 dBV/Pa (28 mV) |
| Self-Noise | 7 dB-A |
| Phantom Power Requirement | 48V |
| Weight | 454 g (16 oz) |
Overview of the Shure KSM44 as a side-address condenser microphone for studio use, highlighting key attributes.
Details on the KSM44's audio performance, including frequency response and SPL capability, and its typical usage scenarios.
Instructions for mounting, powering, positioning, and setting polar patterns and frequency response.
Explanation of the three polar patterns: Cardioid, Omnidirectional, and Bidirectional, and their pickup characteristics.
Details on the three-position switch for adjusting low-frequency response: Flat, Cutoff, and Rolloff.
Information on the 15 dB attenuation switch, load impedance, and the integral pop filter for noise reduction.
Details on CE Marking and conformance to European EMC standards for the KSM44.
Lists of furnished, optional accessories, and replacement parts for the KSM44 microphone.
Contact details for obtaining service or parts for the KSM44 microphone.
To Next Page
