Need help?Do you have a question about the Shure SCM810 and is the answer not in the manual?
General| Type | Automatic Mixer |
|---|---|
| Number of Channels | 8 |
| Maximum Output Level | +20 dBu |
| Inputs | 8 XLR |
| Outputs | 1 XLR balanced |
| Frequency Response | 20 Hz to 20 kHz |
| Total Harmonic Distortion (THD) | <0.05% |
| Phantom Power | 48 V |
| Output Impedance | 150 Ω |
| Maximum Input Level | +20 dBu |
| Common Mode Rejection Ratio (CMRR) | > 80 dB |
| Power Requirements | 100-240 V AC, 50/60 Hz |
Key features include fast-acting, noise-free microphone selection, automatic gain adjustment, and Last Mic Lock-On.
Explains the IntelliMix circuitry, Noise Adaptive Threshold, MaxBus, and Last Mic Lock-On functions.
Instructions for mounting the SCM810 in a standard 483 mm (19-inch) audio equipment rack.
Details on connecting microphone/line sources, output to mixers/recorders, and headphone monitoring.
Setting the Global/Local switch to control which input channels appear at a linked mixer's output.
Details on logic functions (GATE OUT, MUTE IN, OVERRIDE IN) and DB-25 connector pin assignments.
To Next Page
