Need help?Do you have a question about the Shure SRH440A and is the answer not in the manual?
General| Driver Size | 40 mm |
|---|---|
| Frequency Response | 10 Hz - 22 kHz |
| Type | Closed-Back |
| Cable Length | 3 meters |
| Connector | 3.5 mm |
| Sensitivity | 97 dB SPL/mW |
Details the Shure SRH440A headphones, highlighting their sound reproduction, comfort, and driver technology.
Provides instructions on how to clean the headphones and a caution against using solvent-based cleansers.
Illustrates the process of securing the detachable cable using the built-in lock mechanism.
Illustrates how to fold and store the headphones, including visual cues for orientation.
Specifies the transducer type as Dynamic, Neodymium magnet, with a driver size of 40 mm.
Details frequency response (10-22,000 Hz), sensitivity (98 dB/mW), and maximum input power (400 mW).
Lists weight (268 g), connector type (3.5mm jack with 6.35mm adapter), and cable specifications.
Lists furnished accessories like cables and available replacement parts such as ear cushions.
Highlights CAUTION and WARNING messages regarding potential injury or damage from improper use.
Warns about permanent hearing damage from excessive volume and provides guidelines for safe listening.
Details the two-year product warranty and one-year battery warranty, including terms and conditions.
Outlines the process for warranty claims, return procedures, and conditions that void the warranty.
Covers implied warranties, liability limitations, and consumer rights under applicable laws.
Provides contact information and addresses for Shure service centers in the US, Canada, Latin America, and Caribbean.
Confirms product meets European directives for CE marking and provides access to the Declaration of Conformity.
Lists the authorized European representative for compliance matters, including contact details.
To Next Page
