1/3
WA360 -- In-Line Remote Mute Switch
General Description
General Description
The Shure WA360 lets you remotely mute Shure lavalier microphones during presentations or performances.
When installed between a lavalier microphone and a preamplifier or wireless transmitter, the WA360 can function
as an audio on/off button, a push-to-talk switch, or a “cough” button. The WA360 is ideal for vocalists, lecturers,
clergy, sports referees-anyone who needs easy, instant ability to mute a lavalier microphone.
The WA360 is compatible with all Shure microphones terminated with a Switchcraft TA4F connector. These in-
clude Models 839W, WL83, WL83A, WL84, WL84A, WL93, WL183, WL184, WL185, WH10TQG, WH20TQG,
WCM16,SM83A, SM84A, MX183, MX184, and MX185.
The WA360 is supplied with two permanently attached cables: an 102 mm (approx. 4 in.) cable with a TA4M con-
nector that attaches to the microphone cable, and an 838 mm (approx. 33 in.) cable with a TA4F connector that at-
taches to the input jack on a transmitter or preamplifier.
FEATURES
• Small and lightweight, with convenient push-button on/off switch
• Selectable momentary or locking operation
• Provides audio muting without pops or clicks
• Can be used with wired or wireless microphones equipped with a 4-pin female mini connector, (TA4F)
• Plugs directly into a Shure preamplifier or bodypack wireless transmitter
• Ultra-reliable switch for years of dependable service
• Rugged, high-impact case
• Rotatable stainless steel belt clip for easy attachment to belt or waistband
INSTALLATION
1. Plug 4-pin male mini connector (TA4M) from the WA360 cable into the microphone cable connector.
2. Plug 4-pin female mini connector (TA4F) from the WA360 cable into the bodypack transmitter or preamplifier in-
put.
To Next Page
Need help?
General
