Shure WL50 - Page 3

3
ENGLISH
GENERAL
Shure models WL50/MC50 (omni) and WL51/MC51 (unidirectional) are subminiature, electret condenser lavalier micro-
phones. They provide uncompromised sound quality and high reliability with minimal visibility in sound reinforcement
applications such as television broadcasting and stage performances. Despite its small size, the microphone’s condens-
er element provides full, clear and natural reproduction of speech. Each microphone is supplied with two foam wind-
screens to minimize wind noise. The supplied mounting accessories consist of a lapel clip, a tie clip, a pin mount, and
a magnet mount, giving the user a wide variety of options for placement.
MODEL VARIATIONS
WL50 (omni)/WL51 (uni): Intended for wireless use. Connects to Shure wireless bodypack transmitters via a TA4F
connector.
WL50X (omni)/WL51X (uni): Supplied with a 3 m (10 ft.) stripped and tinned cable for wiring to an alternate connector.
WL50–LO: A lower sensitivity variation of the WL50, supplied with a TA4F connector. (omnidirectional)
WL50X–LO: A lower sensitivity version of the WL50, supplied with stripped and tinned leads. (omnidirectional)
MC50 (omni)/MC51 (uni): Intended for hardwired applications. WL50 or WL51 microphone supplied with an in-line pre-
amplifier with a three-pin male XLR audio connector.