Need help?Do you have a question about the SI 7 SERIES and is the answer not in the manual?
General| Brand | SI |
|---|---|
| Model | 7 SERIES |
| Category | Accessories |
| Language | English |
Screen damage and injury may occur from incorrect upper limit settings.
Product operates within 65F - 85F (15C - 29C).
Protect screen from direct sunlight due to thermal expansion effects.
Determine mounting position, ensure 1/2" clearance, and secure to structural lumber.
Lift cassette onto brackets, ensuring all three bracket hooks engage securely.
Unscrew grip lock cap, pull cable to remove slack, and set wing height.
Tighten grip lock cap, cut excess cable, and tuck remaining cable under plastic plate.
Watch tube arrow, fine-tune to 12:00 position, release button at the correct point.
Move the slide switch to the middle position to set motor limits.
To Next Page
