ENG 26
B. Hold the reset button on the universal remote
control again for about 5 seconds until the LED indi-
cator changes from ashing fast to flashing slowly.
C. Once the LED indicator blinks slowly, conrm it
in the app and select “Next”.
D. Click on “Connect” to see your available WiFi
networks in your phone’s settings.
E. Select the network “SmartLife-XXXX” and then
go back to the Smart Life App.
F. Once connected, it will stop ashing. It may take
a while for it to appear in the App. When it nishes
loading, you can rename it and it will be ready to
use. It will appear on the main screen of Smart Life.
To Next Page
Loading...