SI UNIVERSAL IR - Adding Extra Buttons

ENG 30
3.2. ADD EXTRA BUTTONS
3.2.1. CREATING A NEW CONTROLLER
A. Follow steps A, B, C and D from point 3.1.3. and
then click on “More
...
”. Then click on “+” and copy
the button you want from your physical controller.
3.2.1. ALREADY CREATED REMOTE
CONTROL
A. Enter the virtual controller you want to modify.
Click on “Edit” and then on “Copy Button”. Click on
“OK”. Then click on “More
...
” and then about “+”.
B. Point your physical controller at the WiFi remote
and press the button you want to copy. When ni-
shed, click “Finish” to save the changes.