3
Using your Extractor
For best performance, you should switch on the extractor 15 minutes before starting to cook and leave it to run
for approximately 15 minutes after the end of cooking.
Control Panel
A – Power o button
B – Speed level buttons
C – Light button
To switch the extractor light on or o
Press button C.
To switch on the extractor or change the motor speed at any time when the extractor is running
Press the relevant speed button (B) for the first, second or third speed as required.
To switch the extractor o
Press button A.
Fig. 1
A B C
To Next Page
Loading...
