12
Instruction manual
520-700-MU2 • REV. 2.06
Chapter 1: Instructions for Installation and Use
12
1.2. INTRODUCTORY INFORMATION
This instruction manual applies to all models and all options
which may be included in the SIBELSOUND 400 audiometer.
Accordingly, only those functions or options which are found
in your particular model will be relevant.
This audiometer is made from professional quality solid state
components, under strict quality control. However, accidents
can occur during the transport or storage of the equipment.
It is therefore advisable to carry out an initial check on its
condition, and that of the accompanying accessories, before
installation.
WARNING
IF YOU FIND ANY DAMAGE TO THE PACKAGING, YOU
SHOULD IMMEDIATELY CONTACT THE TRANSPORT
AGENCY AND THE DISTRIBUTOR BEFORE PROCEEDING
TO INSTALL. YOU MUST NOT DISCARD THE PACKAGING,
BAGS, ETC. BEFORE THOROUGHLY VERIFYING THAT THE
EQUIPMENT FUNCTIONS CORRECTLY.
To Next Page
Loading...
Need help?
General