7
Figure 3
Figure 4-A Figure 4-B
Screw the lter leveling dial into
the bottom of the lter housing
to prepare to hang and level the
lter.
Place the lter on the aquarium
edge (Figure 4-A) and adjust
the leveling dial by screwing or
unscrewing it until the lter is
level with the aquarium.
Insert the pump cord into the
guides as shown (Figure 4-B)
and run the cord to the outlet
making certain to form a drip
loop as shown in the Safety
Instructions and in Figure 4-B.
ASSEMBLY AND STARTUP
To Next Page
Loading...
