Do you have a question about the Siccom Mini FLOWATCH 2 and is the answer not in the manual?
Disconnect all AC power before pump installation for safety.
Connect the NC safety contact to stop AC unit on condensate overflow.
Fix detection unit horizontally, connect suction and vent tubes securely.
Mount pump securely, ensure cooling, connect discharge tube, consider anti-siphon.
Perform a test by adding water to check pump operation and alarm function.
Clean detection unit components with bleach solution; ensure proper reassembly.
| Discharge Tube Diameter | 6 mm |
|---|---|
| Max Head | 10 m |
| Hose Connection | 6 mm |
| Operating Temperature | 0°C to 50°C |
| Power Supply | 230V~ 50-60Hz |
Loading...