Need help?Do you have a question about the Siegenia AEROPAC and is the answer not in the manual?
Defines the intended audience for this manual.
Specifies how and where the AEROPAC unit should be used.
Provides information on the physical dimensions of the unit.
Outlines critical safety precautions for operation and electrical safety.
Lists all items included in the AEROPAC package.
Details the various functional properties and features of the unit.
Specifies suitable locations and conditions for unit installation.
Details interferences affecting the WLAN signal for the smart version.
Illustrates the recommended positioning for optimal performance.
Guides on marking holes and drilling the main ventilation hole.
Explains drilling mounting holes and inserting fixing screws.
Describes how to insert the ventilation pipe into the wall bore hole.
Provides recommendations for sealing the pipe connection.
Details requirements for insulating the pipe gap for thermal efficiency.
Instructions for ensuring an air-tight seal on the room side.
Guidance on sealing the exterior connection to prevent moisture.
Recommends a separating layer before mounting the grille.
Describes how to attach and seal the weather grille to the wall.
Details the standard method for connecting the unit's mains cable.
Explains how to perform a permanent mains connection safely.
Guides on how to fix and connect the unit to the wall.
Explains optional methods for securing the unit further.
Explains the basic functionality of the AEROPAC ventilators.
Describes the unit's function as a pressure differential ventilator.
Details how to switch the unit on/off and adjust blower levels.
Explains how to control the AEROPAC smart via mobile devices.
Describes how to activate, deactivate, and use the timer function.
Guides on setting and adjusting the desired running time for the timer.
Provides instructions on how to safely clean the unit.
Details the steps for removing and installing filters.
Explains how to remove the protective grid for cleaning.
Guides on how to correctly install the protective grid.
Describes the process of reattaching the front panel.
Lists common problems and their solutions for the unit.
Directs users to the app for detailed operating and troubleshooting info.
Lists optional accessories and their corresponding numbers.
Provides detailed technical data about the unit's performance and features.
Lists information requirements according to EU Regulation 1253/2014.
Invites users to submit comments and suggestions for documentation improvement.
Declares conformity with relevant EU directives and lists test standards.
To Next Page
General